 |
 |
 |
 |
The new Racers Edge Monster Truck Hobby Roller is like nothing else on the market. It features smooth rolling wheels, advanced telescoping aluminum handle, reinforced carrying handles and internal shelf. This bag also ships flat for less expensive shipping charges, so some assembly is required.
The lower deck dimensions are-24.5" long, 18.5 " deep, and 11.5" tall. It easily accommodates The HPI Savage XL! The top shelf dimensions are- 24.5" long, 18.5" deep and 6.5" tall. You can easily slip an 1/8th scale buggy or Truggy with the wing removed or the tires removed. The exterior dimensions are-26" long by 19" wide and 21" tall.

The easiest way to install the interior support walls is by lying the bag down on its side opposite the zippered opening. Install the rear wall by sliding the panel at an angle towards the top corner of the bag, then slide the bottom section into place. This is the same order of operations for the front panel. Be sure to install each panel with the velcro strip facing inside the bag and towards the top. Install the mid deck by lining up the velcro tabs and sliding your hand along the joint to reinforce the hook and loops. Then simply attach the four support straps to the underside of the shelf and your done! Enjoy! |
|
 |
 |
|
 |
|
 |

|